Loading Dock
Safety Systems
Industrial DoorsErgonomic
In-Plant Equipment
Waste Handling &
Recycling Systems
Green ProductsMaintenance & Repair
All Categories > Waste Handling & Recycling Systems > Item # Stationary Compactor  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # Stationary Compactor, item-1058

High Density, Dual Cylinder, Heavy Commercial, Dry Pack Compactor

  • Reduce Hauling Costs - Compacting waste with a dual cylinder compactor means fewer trips to the landfill.
  • Reduce Employee Labor - Use the compactor instead of your employees to break down large bulky refuse.
  • Reduce employee pilferage with a security chute system.
  • Meets or Exceeds Current ANSI Safety Standards for Stationary Compactors.
  • Dry Pack, Forward Sloping Floor Design - Liquid waste runs into the container reducing unsightly and offensive liquid discharge behind the ram and under the compactor.
  • Heavy Commercial/Light Industrial Construction for applications with 1 to 2 container pulls per week.
  • Large 42" x 57" Clear Top Opening.
  • Engineering services for system designs that meet your individualized needs.
  • American Manufacturer Electrical and Hydraulic Components - Specified for dependability, serviceability and nationwide availability.
  • Outperforms and outlasts all other stationary compactors in its class.
  • Industry’s leading Warranty
      Three Years Ram and Frame Weldment
      One Year Electrical and Hydraulic Components
      Parts and Labor

    Conforms to Current ANSI Z245.2 Safety Standards

  • Specifications  · Standard Features  · Optional Features  · Caution!



    CP-2102, 2 cu. yd. Stationary Compactor

    Mrf's Rating

    2 yd³

    WASTEC Type Rating

    1.47 yd³

    Clear Top - Opening

    42 in

    Clear Top - Width

    57.5 in

    Chamber Length

    43.5 in

    Ram Stroke

    60 in

    Ram Penetration

    16.5 in

    Normal Force Rating1

    44.8 / 70,700

    Max. Force Rating2

    49.8 / 78,500

    Normal Hydraulic Syst. Pressure

    1,800 psi

    Max. Hydraulic Syst. Pressure

    2,000 psi

    Ram Face - Width

    59.5 in

    Ram Face - Height

    26.5 in

    Volume Displacement

    84 yd³/h


    10 hp

    Cycle Time

    63 s

    Discharge Opening - Width

    61.5 in

    Discharge Opening - Height

    33.5 in

    Discharge Opening - from Ground

    16 in

    Base Unit Weight

    6,200 lb
    1 Ram PSI at stated forces lbs.
    2 Ram PSI at stated forces lbs.

    Standard Features
  • Frame:
      Floor, Work Hardening Steel Plate 3/8"
      Floor Supports (6) C3 x 4.1#, (1) C4 X 5.4#, (1) C6 x 13#
      Side Plates 1/4"
      Side Supports (3) 6 x 8.2#
      Breaker Bar 1-1/2" x 8" Vertical Bar
      Weldment 1" x 4-1/2" Horizontal Bar
  • Ram:
      Face Plate 5/8"
      Floor Plate 5/8"
      Side Plates 3/16"
      Top Plate 1/4"
      Top Supports (8) C4 x 5.4#
      Guides - Adjustable Nylatron Blocks
    • Removable Access Panels
    • Weatherhood/Safety Panels
    • Ratchet Binder/Hooks: 90,000# Capacity
    • Remote Power Unit
    • Reservoir: 40 Gallon Capacity
    • Oil - Suitable for Wide Temperature Range
    • Oil Sight Gauge w/Thermometer
    • Pump: 16 GPM, Constant Displacement Vane Type
    • Cylinders: (2) 5" Bore x 3" Rod x 60" Stroke
    • UL Listed Electrical Components
    • Motor: 10 HP Tri-Volt 3 PH
    • Controls In Main Panel:
        Automatic Multicycle
        Automatic Safety Retract
        Automatic/Manual Selector Switch
        Ram Position Switch
        Full/Jam Automatic Shut-off w/Indicator
        Key Lock On/Off Switch
        Pull-To-Start/Emergency Push-To-Stop Button

  • Optional Features
    • Safety Handrails
    • Safety Gate w/Interlock
    • Side or Rear Load Hopper
    • Enclosed Hopper w/Door
    • Security Chute (Side or Rear)
    • Full Enclosure
    • Safety Interlock System
    • Deodorizer Spray System
    • UL Certified Panel
    • Photo Electric Start System
    • Keyed Pinning/Boost Override System
    • Advance Full Load Indicator
    • TEFC Motor
    • Low Oil Indicator with Shut-off
    • Thermo Oil Heater
    • Power Unit Weather Cover
    • Container Guide
    • Through Wall Ratchet Kit

    This equipment Should Be Operated By Properly Trained Personnel. Improper Use, Misuse or Lack of maintenance could cause injury to people and/ or property.
    Photos used in this brochure are illustrative only. Due to its commitment to quality, SP Industries’ specifications are subject to change without notice to accommodate improvements to its equipment. Information contained within this literature is intended to be the most accurate available at the time of printing.


    ·  Rear Load Security Chute and Side Mounted Power Unit

    ·  Side Load Security Chute and Deck Mounted Power Unit

    Site created by ThomasNet Web Solutions and powered by Navigator Platform
    Paul Reilly Company | Since 1977 Loading Dock Equipment Specialist