• Dual cylinder design
  • Designed to handle packaging materials, dry wastes and process scraps
Unit of Measure



N/A 2 yd³84 yd³/h

Cycle Time

N/A 63 s

Clear Top Opening Length

N/A 42 in

Clear Top Opening Width

N/A 57.5 in

Hydraulic Cylinders Quantity

N/A 2

Hydraulic Cylinders Bore

N/A 5 in

Hydraulic Cylinders Rod

N/A 3 in

Hydraulic Cylinders Stroke

N/A 60 in

Ram Penetration

N/A 16.5 in

Ram Face - Width

N/A 59.375 in

Ram Face - Height

N/A 25.5 in

Normal Packing Force

N/A 70,700 lb

Maximum Packing Force

N/A 78,500 lb

Normal Operating Pressure

N/A 1,800 psi

Maximum Operating Pressure

N/A 2,000 psi
Standard Paint Finish1 N/A Beige Dark Blue Dark Brown Dark Gray Dark Green Medium Blue Medium Brown Medium Gray Medium Green Red Yellow

Recommended For

N/A Business Offices Corrugated Material Only Grocery Stores Hotels Industrial - Heavy Industrial - Light Institutional Retail Outlets Retail Outlets - Large Transfer Stations Warehouses

Construction Specifications

Construction Specifications

  • Frame:
    • Floor Plate 3/8" AISI-1045 Plate
    • Floor Supports (6) C 3" x 4.1#, (1) C 4" x 5.4#, (1) C 6" x 13#
    • Side Plates 1/4" A36 Steel
    • Side Plates Support (3) C 6" x 8.2#
    • Breaker Bar 1-1/2" x 10" AISI-1045 Plate Vertical Bar, 1" x 4-1/2" A36 Steel Horizontal Bar
    • Ram Hold Down Bars 1" SQ. Bar
  • Ram:
    • Face Plate 5/8" A36 Steel
    • Floor Plate 5/8" A36 Steel
    • Side Plates 3/16" A36 Steel
    • Top Plate 1/4" A36 Steel
    • Top Supports (8) C 4" x 5.4# Structural Steel Channels
    • Guides Adjustable Nyloil Blocks
  • Remote Power Unit:
    • Oil Reservoir 40 Gal.
    • Oil Pump 16 GPM, Continuous Displacement Vane
    • Motor 10 HP - 208/230/460V 3-PH

Saving Money with an SP Compaction System

Saving Money with an SP Compaction System

N/A What is Compaction all About?

Compacting material - garbage/recycling/scrap/process bi-product - is simply removing the air spaces from the materials and filling voids normally found in open-top containers. For example, a 3' x 3' x 3' corrugated cardboard box takes up 1 cu.yds. of space. When compacted, it becomes a flat sheet (6' x 6' x 1") and takes up a mere 0.11 cu.yds. of space. The idea is to simply remove the air, or unoccupied space, from the material being processed, therefore decreasing size & increasing density!

Bottom Line: Creating high density, reduced volume material is a more efficient and cost-effective method to handle large volumes of material.

Will an SP Compactor Help my Company?

The answer is usually yes.
  • Packing more material into a container means fewer trips to the landfill, recycling center, etc. Fewer hauls equals fewer charges.
  • Compaction minimizes waste stream material space on your property. For most facilities, space is a premium asset. An SP compactor system occupies less space than the open-top containers it replaces.
  • Compaction keeps materials safely undercover and out-of sight - preventing it from becoming windblown debris and a source of pollution, while keeping rodents, scavengers and employees out.
  • We won't go so far as to say our compactors are pretty, but they are certainly better looking than the alternative!
  • All-in-all, an SP compactor helps maintain a cleaner, more environmentally sound facility that beneficially impacts your employees, your visitors and your company.

Why SP Compactors are the Best Value

Why SP Compactors are the Best Value

N/A Construction and Component Quality #1

All compactors on the market may serve the same function and look similar, but an SP Compactor is superior in ways that you can't readily see unless you scrutinize the design, the construction and the component quality. Below is a list of some of the key areas that set SP compactors above the rest:
  • Structural Steel Supports versus Formed Steel
  • Breaker Bar Rigidity
  • Thrust Beam Design
  • Compaction Chamber Floor Plate
  • Ram Guide System
  • Hydraulics
  • Electrical Components
Service. Service. Service!
  • Unrivaled engineering services. We build machines to perform the job you need done, and to last. We have 30 years of exclusive engineering and manufacturing expertise - designing and building compactors for all forms of waste stream materials. Each customer has unique requirements, and we apply our knowledge and skill to provide the best overall cost and performance solution.
  • Local availability through our nationwide network of factory-trained dealers and distributors
  • Nationwide installation and service
  • Best-in-Industry warranty program

Standard Features

Standard Features

N/A Remote Power Unit:
  • 10' Power Supply Cable & 10' Hydraulic Hoses
  • Oil Sight Gauge with Thermometer
  • Tri-volt 3-Phase Motor
  • Key Lock On/Off Switch
  • Mushroom Type Maintained Emergency Stop Button
  • Green Start Button
Main Control Panel:
  • Multi Cycle Timer
  • Automatic Safety Retract
  • Ram Position Switch
  • Auto Manual Toggle Switch
  • Full/Jam Automatic Shut-off with Indicator Light in Stop Button
  • Keyed Jog Controls Mounted in Main Panel
Other Features:
  • Removable Top Access Panels
  • Ratchet Load Binders

Optional Hoppers, Dog Houses, Chutes, Enclosures, and Deck

Optional Hoppers, Dog Houses, Chutes, Enclosures, and Deck2 N/A
  • Rear Load Hopper with 42" Load Lip
  • Rear Load Hopper with Interlocked Gate
  • Side Load Ground Load Hopper
  • Side Load Dock Load Hopper with 42" Load Lip
  • Rear Load Dog House with 1 Door Interlocked
  • Side Load Dog House with 1 Door Interlocked
  • Side Load Dog House with 2 Doors Interlocked
  • Security Door & Thimble with Interlock Switch on 15' Cable
  • Side Load Security Chute
  • Rear Load Security Chute
  • Rear Load Full Enclosure
  • Side Load Full Enclosure
  • Walk On Deck (750# Capacity) - Up To 84" W
  • Drive On Deck (5,000# & 10,000# Capacity) - Up to 96" W
  • 18" Deck Extensions
  • Safety Hand & Toe Rails
  • Solid Side Safety Rails

Specialty Optional Equipment and Design Features

Specialty Optional Equipment and Design Features3 N/A Fabrication Options
  • Through Wall Ratchet Binder Assemblies
  • Pinning Tunnels - 1 or 2 Tunnels
  • Power Unit Weather Shield (Covers Top & Sides)
  • Power Unit Cover (Covers Front/Back, Top/Bottom, Sides with Door)
  • Breaker Bar Teeth
  • Glass Wiper
  • Wet Pack Options (Includes: Floor Baffle, Raised Legs, Snout Ext.)
  • Bar Grate System for High Volume Wood Waste
  • Power Unit Saddle
  • Side Access Panel(s)
Electrical & Hydraulic Options
  • Keyed Pinning/Boost Override System with Side Mounted Controls
  • Main Controls - Mounted on Compactor with Cover
  • Main Controls - Additional Set Mounted on Compactor with Cover
  • Main Controls - Additional Set on 10' Remote Cable
  • Jog Controls - Remote on 10' Cable
  • Jog Controls - Mounted on Compactor
  • Code Start System - Mounted in Main Panel
  • Code Start System - Mounted on Compactor
  • Code Start System - Remote on 10' Cable
  • Program Start System
  • Photo Eye Start System
  • Infrared Start System
  • Sonic/Diffuser Start System
  • Security Lock Latch System
  • Interlock Switch on 10' Cable
  • Advance Full Load Indicator
  • Flashing Strobe Warning Light
  • Oil Pressure Gauge - Color Coded
  • Oil Pressure Gauge
  • Mounting Bracket with 15' Hose for Mounting Oil Pressure Gauge
  • Low/Hot Oil Shut Down with Indicator Combination
  • Thermo Oil Heater
  • Oil Cooler
  • Biodegradable / Water Soluble Hydraulic Oil
  • TEFC Motors
  • Upgraded Power Units
  • Gas/Diesel Operated Power Unit
  • UL Certified Panel
  • Auto Dialout Systems

SP Industries Products and Service Nationwide

SP Industries Products and Service Nationwide

N/A "Let Your [Index] Finger do the Walking"

SP Industries products and services are available nationwide from our sales and service staff and our network of authorized factory-trained dealerships.

Our new EM Series are 100% electromechanical:
  • Completely eliminate hydraulic fluid and hoses
  • Free up floor space
  • Eliminate bulky power units
  • Provide safer operation with 24-volt control system
  • Eliminate the risk of hydraulic fluid contamination
Designed for environmentally conscious institutional, commercial, and industrial work environments, EM Series units require less maintenance, and remove the potential for fires, leaking seals, and other hazards associated with hydraulic systems.

We look forward to helping you with all your waste removal, material handling, process recovery and recycling efforts.

SP Industries designs and manufactures a comprehensive standard line of industrial and commercial grade compactors with precrushers, transfer station equipment and cart dumpers to meet small to large capacity operations.

We also offer a wide variety of specialized systems to handle wet waste, food products, metal scrap collection, fluid recovery, newsprint recycling and other difficult and/or voluminous materials.

Additional Information

Additional Information

N/A Built Tough. Built Better. Built to your Needs.

Working from our extensive range of compactor designs, standard and optional features, and custom engineered solutions, each compactor we build is seamlessly tailored to meet the customer's exact requirements. We are confident that SP Industries compactors offer the best overall cost and performance solution for heavy-duty, long-life compaction and waste handling.
  • 30 years engineering and manufacturing expertise
  • Local availability through nationwide network of factory-trained dealers and distributors
  • Nationwide installation and service
  • Best-in-industry warranty program
  • 1 SP Industries offers a variety of standard paint color at no charge. Please contact the factory for custom color options.
  • 2 Available on all CP-2102 machines.
  • 3 Not available on all CP-2102 model configurations. Consult factory for availability and to discuss your specific application requirements.