| Items |
item-1167 Durulite® Retailer |
item-1172 Proline™ 350 |
item-1173 Chase Model SC3002 |
|||
| Door Panel | Lightweight, opens easily and closes every time. Overall panel thickness is 1/8" and the door can be sized up to 8' x 8'. Cross-linked polyethylene oter skin retains its properties to -40°F | The doors are available insulated or non-insulated with a wood core. The core of the insulated doors are 1-1/2" thick with a combination of wood and foam and are considered heavy-duty. The non-insulated wood core doors are constructed with durable 3/4" th | The doors are constructed with a 3/4" 7-ply plywood for structural integrity. | |||
| Insulated Core |
High density, Non-CFC urethane core is foamed-in-place to insure a tenacious bond between the core and outer skin, providing sound abatement and excellent thermal separation with an R factor of 9.86.
 |
|
|
|||
| Upper Hinge |
Patented V-Cam hinge system can travel up to 120° in each direction.
 |
|
|
|||
| Window | Large polycarbonate windows are virtually scratch resistant. | ABS window frames are chemically bonded for a permanent seal that stands up to repeated washdowns.Single pane 1/8" thick polycarbonate windows are used in the wood core doors, double pane windows are used in insulated doors. | Each window is 1/4" polycarbonate with either a vacuum formed frame or gasket. All windows are factory installed. 9" x 14" is standard, additional sizes are available. | |||
| Internal Reinforcement | A 1" diameter hinge post is molded in the door and runs the full length of the panel. the hinge post sets into the jamb guard for structural stability and strength. the leading edge is reinforced with 1" x 1" tubular steel adding additional structural sup | |||||
| Gasketing | Replaceable perimetr edge gasketing is used to reduce energy flow between environments. The door comes standard with gasket along the leading, back and bottom edges. Partially gasketed doors are available. | USDA accepted durable gasketing is factory applied without the use of metal strips or fasteners, making it easy to replace in the field. | Optional perimeter gasketing provides a positive seal for thermal and visual seperation. | |||
| Lower Hinge Assembly |
The lower finge assembly holds the lower hinge post in position, preventing horizontal movement of the door. It also serves as a Lower Hinge Guard, protecting the Lower Hinge Post from impact damage.
 |
|
|
|||
| Bumper Strips | Optional bumper strips are available in PVC or extruded aluminum. | |||||
| Impact Plates | Optional impact plates are available in stainless steel, galvanized steel, ABS plastic or Kydex®. | Stainless steel impact plates, standard on the 3002 model, are screwed to both sides of the door's surface. | ||||
| Patented ProLoc™ Edge System |
 |
Chemically bonds to the face sheets providing a positive seal and preventing moisture or contaminates from entering the door panel.
|
|
|||
| Hinge |
 |
Classic "E" series gravity close hinge system mounts to the jamb with offset hardened steel can and rollers, for years of service and minimal maintenance.
|
Proven hinge system mounts to the janm with offset cam system and hardened rollers, for years of service with minimal maintenance.
|
|||
| Applications |
|
|
|
|||
| Environment |
|
|
|
|||
| Options |
|
|
|
|||
| Edge Capping |
 |
|
Standard 18 gauge stainless steel edge capping presents a clean, finihsed appearance and extra edge protection.
|
|||
| E Hinge |
 |
|
Classic "E" hinge has a removable cover for easy maintenance.
|
|||
| C Hinge |
 |
|
By removing the cover and screws, the "C" hinge can be easily adjusted without removing parts.
|
|||
|
|
||||||
